Features

• Note -increased speeds require a Belkin Pre-N adapter
• Wirelessly share a broadband Cable or DSL Internet connection
• With increased Pre-N speeds & coverage, you can more easily transfer large files!
• Built-in 4-port 10/100 Ethernet Switch
• Improved resistance to wireless interference - the router will sense potential interference and dynamically shift to the clearest wireless channel available

Features

• Captures all the advantages of the critically acclaimed n50
• Cranks up the juice with advanced options to dominate your game
• Combines keyboard and gamepad into one small, easy-to-use device
• More tools for customizing your game than ever
• Designed with an intuitive nature and stylish versatility

Reviews (13)

Great device
This is a great little gaming device. The macros and it's application are terrific. Definately a worthwhile investment if you're a fps gamer.

My only complaints are these:
The thumb-button that is supposed to represent the spacebar is too far away from the keys. You have to really stretch your hand to reach it.

Like everyone else has said, the orange button above the thumb-pad takes too much force to press. It's virtually useless unless you can get it to soften up some.

Other than that, I love this little thing. I wondered whether or not I would when I was playing my first few games, but now i am sure i made a good investment.

Great controller - once you learn how to move the handrest!
The reviews on here and elsewhere mention that you should give the handrest a "good yank" to adjust it. Well, I yanked and yanked, and it didn't budge... until I finally figured out that it doesn't slide back and forth! It lifts upward, off the unit! Lift it up to remove it. Then, you'll see two sets of holes - a set closer in to the keys and a set farther away from the keys. So, the hand rest has two settings. And, you can just keep it removed if you don't like it.

I figured that if I can have this much problem trying to slide the hand rest out instead of lifting it up, then others might be having the problem too. Instructions are nowhere to be found on here, on the Belkin Web site, or in the boxed instructions.

Unlike the other reviews, the keys on my unit are quite flexible... the stiffness is very minor. The unit is quite responsive. Plus, it seems to be very solidly built. The rubberized pad on the underside of the unit keeps it from sliding around too much on my desk.

Being a tech, I tend to dislike using the software that comes with most hardware - printers, mice, etc. But after installing the Nostromo software, I found it to be pretty cool (looks like it takes up about a 4MB footprint). It's easy to use - plus, once you've got the keys mapped out for a game, you can set it up for automatic mode, so that each time that particular game is launched, that key map profile is automatically loaded dynamically. No manual switching of profiles is required!

Fabulous for just about anything - works GREAT on a Mac!
I spend a lot of time on my computer, for games as well as more serious pursuits. The n52 has been a surprisingly valuable and wonderful peripheral.

Though the n52 does not include Mac drivers or software in the box, these were easily downloaded from the Belkin web site, and they work great. Within a matter of minutes, I had the Nostromo set up for shortcuts in my major apps - Safari, Photoshop, etc. I use it a lot when web browsing, using the "cursor" keys to navigate through pages and browsing history, the directional pad for horizontal/vertical scrolling in a page, and a couple of other keys for cycling through tabs.

For gaming, the n52 has also proven to be handy. It didn't take long for me to get it set up the way I like for Unreal Tournament 2004. I have cursor keys set to movement, various other keys set for my favorite weapons, and the directional pad set to jump or toggle the secondary fire mode. After a few hours of playing, I got to the point where I was actually playing BETTER using the Nostromo - probably because everything is all in one place, and it just "feels" like I have a more direct connection to the game.

Anyway, the long and the short of it is this: the Nostromo n52 is incredibly useful whether you play games or not. I use it for gaming and for getting Real Work(tm) done, and it's proven its worth in both areas. I've generally had bad experiences with Belkin hardware, especially on the Mac - but the Nostromo is a definite exception. The drivers and configuration software are first rate, and I'm extremely happy with the whole package. Highly recommended!

Not For Rights
This Is very Bad Get A Joystick Or Stay With the Keyboard, And if you are a righty this is not for You, the only good thing is It Can Be Good For RTS Games Like: Empires Dawn Of The Modern World And I have A Life This Is SO BAD I AM Making A review + it got lead in it SOoooooooo

A must for the serious FPS Gamer
This device provides a good combination of ergonomics and functionality. It is certainly more comfortable than a standard QWERTY board.
I have only two complaints. The big red thumb button requires too much force to push. To get it to work will almost always force the entire pad to slide to the left if not countered by holding down the unit firmly. Because of this, I would only find this button useful when pressing other keys at the same time is not needed. The other problem is the thumb switch, which mimics the placement of the "space" bar on a QWERTY board. This key is much farther from the other keys than it needs to be and also is a bit "finicky" in how it responds.
In conclusion, the Nostromo is well worth the money for anyone who spends considerable time with a FPS. I have only been using it for a few hours now and already I have seen improvement in my game and less fatigue on my "keyboard hand". ... Read more

Product Description

Wireless Pre-N Network Notebook Card ... Read more

Features

• Note -increased speeds require a Belkin Pre-N router or access point
• With increased Pre-N speeds & coverage, you can more easily transfer large files!
• Improved resistance to wireless interference - the adapter will sense potential interference and dynamically shift to the clearest wireless channel available
• If a standard 802.11g or 802.11b networking product is introduced into the Pre-N network, the Pre-N adapter will not drop to the lowest networking speed.
• When used with 802.11g & 802.11b devices, the Pre-N adapter improves their wireless coverage by up to 20%!

Reviews (5)

Works Like A Dream!
After being frustrated with wireless networking on a notebook computer with the old Linksys system in our house, the Belkin notebook card works effortlessly!Our old system had our notebook computer off-line more than it was on.After the quick installation of this notebook card into our Dell Inspiron notebook computer, it works 100% of the time.We have the Belkin Pre-N Router as well.The system is well worth the money.

Forget about Linksys SRX, go with Belkin Pre-N!
I had originally purchased a Linksys WRT54GX router along with the companion SRX wireless PC card because:1) I wanted to replace an 802.11b wireless network in my 2-story home for better coverage (I was having to use a Linksys wireless access point in repeater mode to get "complete coverage" with the old setup); and 2) I wanted a faster wireless network.

I quickly became frustrated with the new Linksys SRX wireless setup, primarily because my laptop (a 2004 HP model) wouldn't always detect the wireless card after powering up from sleep mode, and often there would be dropouts in my wireless internet connection, even when my laptop remained stationary.In addition, even though the wireless icon in the task bar would constantly indicate a connection speed of 108.0 Mbps, it was obvious that my new wireless internet connection was often far slower than even my old 11.0 Mbps wireless network connection!This problem was especially obvious with websites rich in photo-quality graphic images, like ESPN.com.

So, I contacted Linksys tech support and, with the help of a friendly tech support agent, reprogrammed several parameters on the router.The problem improved, but only temporarily.Frustrated, I returned both the wireless router and the PC card and immediately ordered the Belkin Pre-N router and PC card (based on Cnet reviews, which rated the Belkin system higher anyway).

Both the Belkin wireless router and PC card installed quite easily with the accompanying installation CD's and my system has been up and running without a hitch--so far.One other thing I have liked about the Belkin system is that (using the included Belkin Wireless Client) it displays realtime send and receive speeds of the wireless card, which are often slower than the 108.0 Mbps the wireless icon in the taskbar is constantly pegged at; but at least I know the "true" speed of my wireless network at any given point in time (the measured speeds that are displayed are constantly changing and fluctuate mainly according to distance from the router).

Needless to say, I have been impressed with my early experience with this Belkin system and won't hesitate to highly recommend it to others considering a future home wireless network upgrade.Oh, and did I mention that the Belkin system was cheaper than Linksys'?!!

A...mazing once you get past the installation problems
Ok, so I bought the Pre-N router and it's unreal. Then I got the Pre-N card to go with it and had lots of problems. Basically the Belkin Wireless Client Utility is buggy as you like and has crashed EVERY time I tried to use it. So I downloaded Boingo's free wireless client, et volia, it connnects first time! The only downside is it reports the signal strength inaccurately. It shows a poor connection, which after using Cnet's bandwidth meter, I found that I have anything but. I have a cable modem and Cnet rated my connection as above a T1 and below a T3. Believe me it's super, super fast.

great wireless card with some restrictions
this is a great wireless card with the best range/speed performance i have seen for a card without an external antenna. the only problem i have encountered so far is it will not operate on batteries in my fujitsu p series lifebook. it looks like the card simply pulls too much power and will lock up the notebook when i switch to batteries. combined with the pre n router this is a great combination for situations where it is difficult to get a good wireless signal. i live in a concrete house and was using a linksys with a repeater to get to the dead spots. the belkin pre n has allowed me to eliminate the repeater and actually get better throughput.

BEWARE-PCMCIA NOT SUPPORTED
Note:This is not an actual review of the product because I cannot install it.

Although it is not indicated on the Amazon website, this wireless card only works in a Cardbus slot, not a PCMCIA slot.Also, it will only work with Windows XP and Windows 2000.So I'll be sending this one back...

On the other hand, I recently installed a Pre-N router and use it with some 802.11b wireless devices, and it works great--noticeable boost in both range and throughput.

TMR ... Read more

Features

• Adds 802.11g networking capability to your computer or network device
• Works with gaming consoles such as Xbox, PlayStation 2 (Requires Sony PS2 Network Adapter), or GameCube
• Works with all Ethernet-equipped computers or network devices
• Offers backward-compatibility with all 802.11b 2.4GHz wireless devices
• Features wireless 64- and 128-bit WEP encryption

Product Description

Pre-N Wireless Desktop Network Card, PCI ... Read more

Features

• WiFi Protected Access (WPA) support protecting your wireless network with enhanced encryption
• 800 percent greater coverage than standard 802.11g with improved reliability and fewer drops
• 600 percent greater speed than standard 802.11g--great for gaming, streaming video, Voice over IP, and moving large files
• Using this Pre-N card with an older 802.11g or 802.11b networking product increases your wireless coverage up to 20 percent
• Will not drop to the lowest networking speed in a mixed-mode environment if a standard 802.11g or 802.11b device is introduced

Reviews (2)

Dude! Turn the card over
J. Lovell complains that the card doesn't work with XP. Mine does, and beats hell out of the D-Link it replaced, which was always flaky and finally quit altogether (I ended up only able to talk to the router, not the Internet or the rest of the LAN). The Belkin does have a problem: crappy manual. When it says "insert card with the label side up" what it means is "insert card with the label side down." A little experimenting outside the computer reveals how the card is keyed.

wait
i purchased this card to work with the pre-n router the belkin offers. i should have know a better when i looked at the box that it was going to be trouble. as you can see from the picture, this is just the cardbus pre-n (f5d8010) card bundled with a pci-to-cardbus adapter. installation failed, as windows xp seems to be able to only support 16-bit pcmcia cards with the pci-to-cardbud adapter that belkin provides (ricoh r5c520-based contoller).

after multiple calls to support where they spent 10 minutes asking me if i was inserting the card correctly over and over. each call ended with either "call microsoft" or "we'll call you back within 48 hours". i'm still working this issue to resolution with belkin, but i don't hold out much hope.

---
RE: Dude!

dude! i did! maybe it is a compat issue with the nForce3 chipset and the ricoh adapter. i don't know, but after replacing the card with a new one and getting the same message when the card was inserted, i quit and returned it.

"The device Ricoh R5C520 Carbus Adapter has detected a CardBus card in its slot, but the firmware on this system is not configured to allow the CardBus controller to be run in CardBus mode. The operating system will currently accept only 16-bit (R2) pc-cards on this controller."

i've worked with computer hardware for 15 years, i know how to insert a carbus card, thanks. ... Read more

Product Description

Adding six FireWire ports to your computer couldn't be easier. The Belkin 6-Port FireWire Hub stands vertically on your desktop, conserving precious desktop space as it saves you from reaching behind your computer for ports. Simply plug your high-speed, Zip, optical, or disk drive, scanner, printer, and other peripherals into the five rear Hub ports; a sixth port is conveniently located up front for easy access for your digital camera or other portable peripherals. The unit stands alone or docks with additional Hubs, making it easy to put all your multimedia gear on the ultrafast FireWire track. FireWire technology supports up to 63 devices on one computer with Plug-and-Play ease.The Belkin 6-Port FireWire Hub's sculpted, breakthrough design is aesthetically pleasing as it is functional. Intrinsic cable management flows your cables from the Hub in single file arc, reducing desktop clutter. ... Read more

Features

• Works for your iPod, MP3, DV camcorder, web cam, PlayStation2 (PS2), and other Firewire devices
• Delivers a full range of FireWire performance at speeds of up to 100, 200, and 400 Mbps-depending on the capacity of your devices

Features

• Up to 100 Meter Range
• Connect with up to 7 Bluetooth devices at a time
• Simple Installation - remove the cap and plug it into an available USB port!
• Built-in 128-bit Encryption & Authentication
• Requires Microsoft Windows 98SE, Me, 2000, XP, 2003 Server, or Mac OS X (Mac OS X driver is needed from Apple)

Product Description

The Belkin High-Speed Mode Wireless G Router with Built-In USB Print Server shares your broadband Internet access with your connected computers and enables them to print wirelessly to your USB printer. With a Belkin Router as the central connection point of your network, your computers can share files and resources as well as print and get online, all at the same time.

By achieving networking speeds that are faster than standard 802.11g, Belkin High-Speed Mode (HSM) networking products provide increased real-world networking speeds. This means you will see overall speed improvements in mixed-mode networking environments where other 802.11g devices may be present. HSM offers even faster speeds in pure HSM environments. HSM technology is interoperable with all other wireless devices.

• Shares your broadband Internet access up to 35% faster than standard 802.11g
• Print wirelessly from any networked computer
• Works with most USB enabled printers

Features

• Built-in 4-port 10/100 Ethernet Switch
• Built-in NAT/SPI Firewall
• Security - 64- and 128-bit WEP Data Encryption, and WPA with TKIP & AES
• Using 802.11g, you can achieve up to 54Mbps
• Backwards compatible with 802.11b equipment for a data transfer rate of up to 11Mbps

Reviews (1)

Excellent Combo
I purchased is Belkin when my DLink 713P died (twice).I wanted to go with a brand that was a little more reliable.The Belkin is great!I connect at 54ish mbps and also can connect to my work's VPN; a telecommuters dream - no more dial up.Those who are in to convenience, it is not as user friendly as the Linksys systems, but wait, Linksys does not offer a unit with 802.11g speed, 4 ports, and a print server.This is the one. ... Read more

Features

• Adds Bluetooth wireless technology to your PDA or notebook computer
• Offers built-in security using 128-bit encryption and authentication
• Provides effortless wireless communication among computing devices and peripherals
• Keeps your notebook or PDA batteries running longer
• Works with any device enabled with Bluetooth v1.1 technology

Reviews (22)

Macintosh Compatibility
According to Macintouch, Belkin provides Mac OS X and 9 drivers. Can anyone tell me how well this works with a Mac? I'd buy one immediately for my old tangerine iMac (it's the only computer left out of my wireless network at home.).

I did see a comment that it didn't play well with an Airport Base Station... how about Linksys? Thanks, and if I decide to buy, I'll update this to reflect my experience.

Works with Mac OS X 10.2.4 & TiVo Series 2 SVR-3000
I'm buying another one of these for my Mac because my Sony TiVo Series 2 SVR-3000 just acquired Software Version 4.0-01-2-110 and it works flawlessly with a Linksys WAP. (The Belkin software for Mac is nice if you don't have an AirPort Basestation because it can convert an alphanumeric password to hexidecimal and vice versa. AFP works too.) Attached to the TiVo, the Belkin works great using TiVo Home Media Option and Rendezvous. I have streamed iTunes and iPhotos pictures from my PowerBook G4 with an AirPort card and iMac with an AirPort Extreme card. (Tip: Make sure Mac OS X's Firewall isn't blocking the port TiVo needs to Rendezvous with your Mac.) Streaming audio, video and connecting to TiVo over the Internet works fine too. Now I just need to upgrade to more TiVo Series 2 systems so I can stream shows to different rooms! Amazon should sell these sleek Belkin adapters in bulk... :)

Doesn't work for ME or XP
Like you, i'm trying to set up a wireless network; i'd like to connect my old computer (running Windows ME) to my newer desktop running XP. I bought this device at Staples b/c of its price and because it clearly stated it supported XP and ME. Well the drivers were no good for WinME, even the newest drivers from their website would not install correctly. So it was a dead appendage. Their tech support suggested I try it on a third computer we have, it runs XP. Well it installed fine, but could not link to my network (Netgear router), even after tweaking the router settings. He said he was getting a lot of calls with the exact same problem and suggested I return it and try another device. If possible I'm going to get a refund and buy a little better one - maybe a PCI wireless adapter, instead of the bottom of the barrel cheapo which is my wont. When will I learn? Learn from my mistakes folks and move along - nothing to see here.

Works Great!!! For about 2 months.
I installed this wireless network adapter on my desktop (windows xp). It worked very well for two months, then just unexpectedly died. I would try to reinstall it several times off the product CD, each time telling me a different file was missing, even though the files appeared to be installed (at least I could see them in on my hard drive). Downloaded the drivers from the Belkin website, but that also failed to get this thing to work. This adaper would be recognized by XP, detect the network signal, but it would always tell me "connection failed". Spend your money on a more robust wireless adapter.

WinXP + WEP == Choose ANY other product than this one.
First, the drivers packaged with this unit DID NOT WORK. Had to go to belkin.com and download the latest drivers (not the simplest thing to do without a functioning network adapter, eh?). While those drivers sort-of work, they are still extremely flaky. Not signed/certified by microsoft.

I use WEP to secure my network... this device does not retain the WEP key/settings after a reboot. So, every single time you reboot, you have to re-enter the WEP key and manually start the driver utility.

Signal is very weak - if the signal is lost for too long then the system will eventually hang and reboot itself.

I've been a computer professional for the better part of 10 years now and I'm convinced that ANY product would be better than this Belkin POS. Avoid this product at any price. ... Read more

Amazon.com Product Description

The Belkin wireless notebook network card works as a standalone to give you instant networking capabilities. The card slides easily into your laptop's PCMCIA slot, and sets up quickly with Belkin SOHO networking software. Used in conjunction with a wireless access point, the card lets you join your wireless network to your existing wired network.

Interoperable with any 802.11b wireless device, it uses the 802.11b wireless Ethernet standard to offer you a working range of up to 1,800 feet and speeds of up to 11 Mbps. This plug-and-play card works seamlessly with Windows 95B, 98, 2000, NT, Me, and XP systems. Now you can transfer files around the house or office--enjoying freedom from cables, along with all the advantages of a wired network.

The Belkin wireless notebook network card comes with a lifetime warranty and free, 24-hour technical support. ... Read more

Features

• Effortless laptop connection to a wireless network
• Interoperability with any 802.11b-compliant wireless device
• Data and network security with 64-bit or 128-bit WEP data encryption
• Easy configuration with wireless setup software
• Advanced power management to keep notebook batteries running longer

Reviews (25)

I must be lucky
Despite the bad reviews, I had really good luck with this Belkin card. I'm an American living in Spain, and tech prices tend to be higher here. I bought this "old technology" 802.11b (not 802.11g) card because my ADSL line can only handle 512K downloads, so the 11Mps vs. 54Mps isn't really an issue. In fact, for $35, I found this card to be a bargain option.

I'm not sure why others have had so many problems. The software installed from the CD to my Windows XP laptop in a snap. Next, I slid the card into my PCMCIA slot and it autmotically located my 3Com router next to my desktop. Amazing! (Can you tell that I am a wireless newbie?) I get steady signals and good download transfers on my laptop. Occasionally my laptop loses signal completely (thus, the four-star review instead of five stars), but this is literally for a second and not noticeable (although I'll wait and see if this disrupts downloads, IM connections, etc.)

If you are looking for a good, cheap card, you might give the Belkin a try.

Worked like a charm
Belkin 802.11b Wireless Notebook Card.

Pros: Easy installation and setup and connection
Cons: Requires a wireless router installed

I was looking for an efficient way to connect my laptop (IBM ThinkPad with Windows XP) to a wireless network at home. When
Fry's was selling the product for $5.00 ( $35 actual cost and $30 mail-in rebate) it seemed like just what the Doctor had ordered. A bargain offer
and wireless comfort all rolled into one !

The Network Card easily slides into the laptop's PCMCIA slot. The installation of Belkin software is also pretty straight
forward, except that when configuring there is a delay in what is typed and what is seen on the screen.

I already have a Netgear MR814v2 wireless router installed for my cable modem. So to create a profile to connect to the
wireless router I only had to key in the SSID, Encryption method and the Network Key. All this is easily obtained from the
wireless router configuration.

Even though the technical specification boasts a working range of up to 1500 feet and speeds of up to 11Mbps, I have used it
only at a distance of 150 feet and have experienced speeds of 8 Mbps.

So I highly recommend this product to anybody who is looking for a wireless connectivity for their laptops.

Card works fine with non-Belkin driver
After hours of trying to get this card (version 1) to work with my win2000 laptop I finally in a desperate attempt installed the driver for the Compaq WL100, which is also based on the PRISM-2 chip set. To my astonishment it WORKED !! For the first time my card connected to the access point. After this I could use the Belkin configuration utility to configure wep etc. Moral of the story: do not use the Belkin driver and things will work out fine. Thumbs up for compaq, definite thumbs down for Belkin ...

Does not support all OS
I don't understand why BELKIN don't have different product # or Manufacturer #. This product has version1, version2 and version 3. Each version uses different chipsets and does not support all the OS( For example ver2 does not work on Win NT ). I got this product thinking its version 1 which has support for Win NT but I got version2 which does not. Also did not find drivers anywhere to make this work for Win NT

Be Careful If You Use Windows 95
After struggling to get my Belkin Wireless card to work in my laptop running Windows 95B I finally called for Tech Support. According to them, only Version One of their wireless card will work with 95B. I had a Version Two. Version One cards can be identified by a single LED Light on the card while later versions have two lights.

At any rate, I've still been unable to get the card to work with Windows 95B as its been advertisied. Tech support was no help after I exchanged my Version Two Card for a Version One and was down right rude after I followed their instructions and still couldn't get the card to work.

If you're planning on using the card with Windows 95B, be sure to get a Version One card, and be prepared for a lot of disappointment. ... Read more

Features

• 35% faster than 802.11g
• Advanced security features
• 802.11b backward compatible

Reviews (1)

Belkin - Mini-Wireless Optical Mouse (very good product)
This is the Belkin - Mini-Wireless Optical Mouse that you can see more about on Belkin's site. I tried three wireless mice so far, all of which I bought from Amazon at about the same time (March 2003); they are: the Kensington StudioMouse Wireless, the IOGear Phaser, and this one, the Belkin Mini-Wireless Optical Mouse. You can read my reviews of them on Amazon. I end with this one because, although it can use improvements, it is by far the best product of the three. First off it features USB connectivity, a small wireless receiver that juts out of your laptop's USB port, and it comes with a cable if you're using a desktop and you need to bring the wireless receiver closer to where you're using the mouse. It does not ship with a USB->PS2 port (wise because notebooks now seldom ship with a PS2 port and because USB is hot plug-able & Mac & Windows compatible).

In my testing the mouse works at two feet away from the receiver comfortably. At the advertised three feet, you get patchy and jittery results, beyond that, nothing. Since it is symmetrical, it is the same for left or right handed use. It's rubberized sides and rear and wheel feel good.

Most notably, it really is "mini". It is probably 2/3 the size of an average mouse. This takes getting used to and I'm not yet sure if it's ergonomically straining. I do notice that I switch between left to right hand more than I used to, but that may be because I'm getting used to my new Powerbook's keyboard. The small size is likely going to be the main subject of debate about this mouse - at first, you may not like it, but given time, I'm surprised how monstrous my ordinary mice feel.

When the silver region in the center (which says "BELKIN") is depressed, the rear pops off so you can change the batteries. That feature is a brilliant way to solve the battery changing problem. It ships with two AAA alkaline batteries. For the first two-three days, rechargeable batteries work great. When they start to run down, you'll see the performance of the mouse degrade. This is a feature of rechargeable batteries, not the mouse; at that point, just leave the batteries in the mouse overnight, and it will run them down to nothing so you can recharge them from 0%. Normally though, you'll want to shut off the mouse when not in use for long periods - you do this by shifting a small digit from one side to the other on the bottom of the mouse. It is hard to get your fingernail into this little groove.

It scrolls well, but the scroll wheel makes a clicking noise - I think it should be silent. Same with the two side buttons - they do as expected but make noises - they too should be silent (if I click I click, if I scroll I scroll and it all happens on screen - I don't need the sound effects to reinforce what I just did). It's optical tracking runs at 800 DPI. Overall, this is a fine mouse. I looks really good. People are impressed with it and want to play with it. It's the perfect weight - a little on the heavy side but I like that because it feels like I'm moving something more substantive than a light-as-a-feather mouse.

Additional ways this mouse could improve: 1. Bluetooth - so that you can use it without a wireless receiver if you have the capability (ie, my PowerBook G4 17" features a built in Bluetooth card). 2. Belkin could incorporate a flexible digit that lets you angle the receiver out of the way (so it's not jutting two inches off the side of your notebook). Kensington did a good job on this for it's Pocketmouse Pro Wireless. 3. If I had my way, I would increase the size of the mouse. It is a bit too mini to me. I suspect that not too many people are going to want to feel that as they travel, they are using something which cramps the hands a little. ... Read more

Product Description

The Bluetooth USB Adapter adds Bluetooth technology to your existing USB PC or notebook to let it work with all devices enabled with Bluetooth v1.1 technology.

Wirelessly print, synchronize your PDA information, and create dial-up connections through a mobile phone. From up to 32.5 feet away you can effortlessly transfer data to other Bluetooth devices such as desktop or notebook computers, PDAs, scanners, printers, and even mobile phones-wirelessly. Connect with up to seven other Bluetooth devices at a time.

The Belkin Advantage:

• Belkin Advantage: Offers built-in security using 128-bit encryption and authentication, allowing you to securely access any Bluetooth device without wires
• Installs easily with Plug-and-Play convenience
• Allows you to work at distances of up to 32.5 feet

• Adds Bluetooth connection capability to your USB desktop computer
• Works with any device enabled with Bluetooth v1.1 technology
• Supports Microsoft® Windows® 98 SE, Me, 2000, and XP
• Compatible with Mac OS X v10.2 and higher

Features

• Up to 10 Meter Range
• Connect with up to 7 Bluetooth devices at a time
• Simple Installation - remove the cap and plug it into an available USB port!
• Built-in 128-bit Encryption & Authentication
• Requires Microsoft Windows 98SE, Me, 2000, XP, 2003 Server, or Mac OS X (Mac OS X driver is needed from Apple)

Features

• Stands vertically to minimize use of desktop space
• Five rear hub ports for zip, disk drive, scanner, printer, etc.
• A sixth port conveniently located in front for easy access
• Can be docked with additional hubs

Reviews (1)

Ergonomic Design, But Not Sturdy
Awesome design and looks, however it has trouble standing up. Double Sided tape won't even make it stand up.

Other than that, very sleek, works great and is worth the money if you want a Firwire Hub that performs... Also works w/ or w/o power. ... Read more

Reviews (3)

NO PLUGS
amazons review says it has connecters but it dosnt!!!

Connecting two ethernet wires is a pain. The wire itself contains 8 small color coded wires inside that must be connected indivudaly to the corresponding color on the other wire. These wires can't be soddered because the signal requires metal to metal contact, it won't work with lead sodder. Steady hands and loads of patience are required

that a lot of money for bulk cable
factor in the $75 you'll need to spend for tools to crimp on your connectors (not included) and this is a very bad buy. Hey Amazon, you need to make clear that this is BULK CABLE and not a finished product!

item not as described
i will be returning this to circuit city, the description states this has gold plated connectors, well there are NO connectos here! this is nothing more than a bulk run of cat 5 cable. STUPID AMAZON! thanks for the waste of time! ... Read more

Features

• Installs easily into any available USB port, no need to open up your PC
• Compact design allows you to access the home network while staying mobile
• Auto-detection feature offers future scalability of 10Base-T networks into 100Base-T Networks
• Compliant with USB 1.0 and 1.1 and Ethernet IEEE 802.3 and 802.3u standards
• Monitor network traffic and troubleshooting with LED indicators

Reviews (2)

Great networking alternative, works with XP and 2003
I required a second network card to setup a multihomed server using Windows 2003. Since I was out of PCI slots on my server this adapter was a definitive blessing; it is also an excellent alternative for laptop users and for people who don't feel comfortable opening their computer cases. The adapter's cable length is about a foot 1/2 long, which I think is adequate for most people; it also has a power LED which also serves as a network status indicator.

I also tested the adapter with Windows XP and did not require the CD to set it up (Windows 2003 did require the CD).

Note:
If you install this adapter with your system powered on, you will get an error message indicating a problem starting the device, this is normal and will go out after restarting.

So far, performance has been consistent and it has been 100% stable.

I hope that my review helps in evaluating this device.

Easy to install for any OS
1) You run the setup program in the CD
2) Plug in your USB ethernet adapter into the computer
3) Plug your ethernet cable to the other end

It was so easy to get up and running. Took less than five minutes! ... Read more

Features

• Adds 2 USB printers to network
• Memory buffer for large graphics
• Windows 98SE/Me/2000/XP

Reviews (4)

No problems
Great, right out the box. Very easy to figure out and printing within minutes.

Works great
I spent lots of time with old ethernet/parallel print servers that wouldn't quite work with GDI and other low cost printers.
I was skeptical that this would work.

I was impressed that this print server worked with an easy 5 minute guided setup on my Minolta 1250W GDI printer.
The range of the wireless (Im using B, not G) is fine (covers whole floor of large home).

This device is an excellent solution for putting 2 USB printers anywhere you want them without dealing with the 16ft limitation of USB, or having to run any ethernet or parallel wires.

(I don't have to cut and run any wires in my new home). Plus
you get added bonus of having a normal cheap ($100~) printer
become a networked printer for all to share. (and you don't
have to have the original host computer on to print, as you
would with USB.)

Great wireless print server, but....
I had this working perfectly right out of the box using a Microsoft MN-500 802.11b wireless router. Wireless printing is the cat's meow by the way. (The printer can then be put away in a cabinet for example, which really makes the house/apartment look less like an office.)

Then I took it to another house which had a D-Link 524+ 802.11b/g wireless router, and it simply would not recongnize the Belkin at all. This is obviously a D-Link issue, but can anyone tell me how to determine which wireless products will work with other wireless products BEFORE buying them?

The Belkin unit is very nice though, and recommended.

Incredible Wireless Print Server!
After being frustrated beyond belief with D-Link's wireless print server, I finally sent it back and just by chance happened to see Belkin's new offering, the F1UP0001 wireless print server. Without a doubt, Belkin has managed to hit a home run with this item. I was literally up and running in ten minutes. It can't get any easier. Do yourself a favor and BUY THIS NOW! Avoid the D-Link like the plague, and just go for the Belkin. It's easy to setup, 54mb instead of 11, and has two ports instead of D-Link's one. ... Read more

Features

• Supports 802.11g networks for data transfer rates of up to 54Mbps
• Backwards compatible with 802.11b networks for data transfers of up to 11Mbps
• Fits any standard USB 1.0, 1.1, or 2.0 port
• Built-in 64- and 128-bit WEP data encryption
• Low-Power Consumption Chipset